If you have any queries concerning the aforementioned steps, do let us know in the comments section below. So this was all from this guide on how to flash the Huawei Firmware using the HuRUpdater Tool. Once the file has been flashed, you may now reboot the device to the OS.Then navigate to the HuRUpdater_0.4.zip file, select it and perform a right swipe to flash it. Once the device is booted to TWRP, select the Install option.You may either use the device-specific hardware key combinations or the adb reboot recovery command as well. It’s now time to reboot your device to the TWRP Recovery Mode.Now if you wish to retain the TWRP Recovery after the flashing is complete, then transfer the recovery file to this folder as well.So the newly created folder should have the following four files: Likewise, also transfer the Updater app inside this folder.After this, create a new folder on your PC and transfer all the three firmware files inside it.Update_all_hw.zip, and update_data_public.zip files. Make sure that the downloaded firmware has the update.zip, First off, download the stock firmware of your Huawei device.Flash Huawei Firmware via HuRUpdater Tool Let’s now proceed ahead with the steps to flash the Huawei Firmware using the HuRUpdater Tool. That’s it, these were all the requirements.
Finally, download the latest HuRUpdater Tool that will be used to flash Huawei Firmware: HuRUpdater_0.4.zip.For that, you may take the help of our guide to Flash TWRP Recovery on any Android Phone. Likewise, you should also have a custom recovery like TWRP installed.With that said, you may refer to our comprehensive guide to Unlock Bootloader on Any Huawei Smartphone.
Do keep in mind that doing so will wipe off all the data on your device, so take a backup beforehand.
0 kommentar(er)
